| FEATURES |
- Meets EIA RS-310C rackmount standard
- Fault detection and alarm notification function for temperature, voltage & fans monitoring
- The temperature sensor is provided with alarm function on the system monitoring board. Users can set the chassis alarm temperature. When over heat is detected, an audible alarm will alert user
- 4 LED indicators on the front panel shows the status of +5V, -5V, +12V & -12V voltage
- Three stages of the fan running speed controlled by the presetting temperature provides users the most cost effective of power consumption
- Supports PS/2 type & ATX or Hot-Swap redundant power supply
- Hold-down clamp designed to protect the plug-in card
- Removable disk drive bay with shock-resistant design
|
| SPECIFICATION |
| Construction |
Heavy duty steel, 19" Rackmount chassis |
| Disk Drive Bays |
Support one fixed 3.5" drive, one removable 3.5" drive and trhee 5.25" removable drives |
| Cooling Fan |
One
12cm DC Fans (86.5 CFM)
One (optional) 8cm DC Fans (35.3 CFM) |
| Air Filter |
One removable filter at front panel |
| Keyboard Connector |
One DIN connector at the front panel |
| Controls |
Power ON/OFF, RESET, Key Lock button |
| Status Indicators |
Power ON/OFF, HDD status, fan status, voltages status |
| Dimension (H x W x D) |
177 x 482 x 501.6mm (6.97" x 18.98" x 19.75") |
| weight |
11.4kgs (29.7 lbs) |
| Passive Backplanes Option |
Support 8/14-slot ISA or PCI/ISA PICMG passive backplane & Baby-AT or ATX motherboards |
| Power Supply |
PS/2
Type & ATX Type power supply
Redundant Power Supply |
|
|
| Environmental Specification |
| Operating Temperature |
0oC ~ 50oC (32oF ~ 122oF) |
| Relative Humidity |
5% ~ 95%, non-condensing |
| Altitude |
10,000ft (3,000m) |
| Vibration |
1.5G Max and 0.1" p-p at 5 to 500Hz |
| Shock |
10G peak acceleration (10m/sec) |
| Safety |
Meets UL, CSA, and TUV |
| EMI |
FCC Class A and CE |
|
|
